Product Specification:
The Professional LED PAR-64 is a RGB colour mixing unit with 36pcs of 1W or 3W
LED: 12 peaces RED, 12 peaces Green and 12 peaces Blue. The LED PAR-64 is available
in 900V/60Hz and 260V/50Hz. With a power consumption of 60W of 180W and a LED lifetime
rated between 80,000 and 100,000 hrs it’s a revolutionairy tool which suites in many applications.
The unit comes complete with100cm power cable including Schuko plug.
Introduction:
The LED PAR-64 Pro is part of a wider range DMX intelligent LED PAR CANS. This LED PAR-
64 Pro is compact and light weight and very easy to use. Ideal for any rental job or installation.
The unit can be controlled by any DMX controller or in stand alone mode.
Caution!:
Do not attempt any repairs yourself! Doing so will void your manufactures warranty. In the
unlikely event your unit may require service please contact McBright.com
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or any
moisture.
Please read this user manual carefully to familiarize yourself with the basic operations of this
unit.
Safety precautions:
• Do not expose this unit to rain or other moisture
• Before plugging to power be sure the local power outlet matches with the required voltage of
the unit
• Do not remove the cover under any circumstances in case your not qualified to do so.
• Never connect to power when cover is removed.
• Never use this unit if it becomes damaged.
• Never connect this unit to any kind of dimmer- and/or power-pack.
• If the unit will not be used for a long time, disconnect it from power supply.
• Always mount this unit safe and stable, and make sure the area will have proper ventilation.
Take care this unit will not mounted in areas close to heat sources such as lighting fixtures,
amplifiers, heat registors, stoves and radiotors.
• Always contact us in case you have any doubts.
General instructions:
First Familiarize yourself with the basic operation principals of this unit by reading the attached
user manual carefully. These instructions contain important safety information regarding the use
and maintenance of this unit.
Set up:
• Before plugging this unit to power make sure the voltage in you area matches the required
voltage for the LED PAR-64Pro. All PAR-LED PRO unites are available in 90/260V
and 50/60Hz. Please always make sure this unit voltages matches your area outlet voltage
before attempting to operate the unit.
•There are 2 ways to control your PROFESSIONAL LED PAR-64 . The first option is by ‘stand
alone’ function, and probably the most used option by an external controller via DMX. DMX
(Digital MultipleX) is the standard language allowing communication between controller and all
kind of DMX products from different manufacturers. The order in which fixtures are connected
in a DMX line does not influence the DMX addressing. For example it does not matter if the last
selected address is in the beginning or in the middle of a DMX line, the controller always will
recognize the fixture by his address.
• In case of controlling your unit via DMX, be sure to use standard 2 conductor shielded cable
which can be purchased at pro sound & lighting stores.
DMX Values and Functions:
CHANNEL |
FUNCTION |
VALUE |
COLOR FUNCTION |
CH 1 |
RED Dimmer |
0→255 |
RED 0%→100% |
CH 2 |
GREEN Dimmer |
0→255 |
GREEN 0%→100% |
CH 3 |
BLUE Dimmer |
0→255 |
BLUE 0%→10 |
CH 4 |
WHITE DIMMER |
0→255 |
WHITE 0%-100% |
CH 5
|
DIMMER |
0→14 |
COLOR DIMMER |
STROBE |
15→255 |
STROBE,CLOCKWISE,GRADUAL
CHANGE SPEED CONTROL |
CH 6
|
RGB DIMMER
|
0→31 |
NO FUNCTION |
32→63 |
DIMMER:FROM DARK TO BRIGHT |
64→95 |
DIMMER:FROM BRIGHT TO DARK |
96→127 |
DIMMER:DARK-BRIGHT-DARK |
128→159 |
GRADUAL CHANGE |
160→191 |
3KINDS COLOR JUMP CHANGING |
192→223 |
7KINDS COLOR JUMP CHANGING |
224→255 |
SOUND CONTROL |
Remarks: When the CH6 on 32-127, it should use CH1,CH2,CH3 together.
|
